Skip to main content

DIY Resources

If you are interested in designing custom accessories for your ErgoDox Wireless, some design files are available on GitHub to help get you started.

warning

SliceMK is not responsible for any irreversible damage caused by the user's DIY projects.

Screws and Hex Nuts​

While screws and hex nuts are preinstalled on all keyboards, their specifications are provided below for those that want to customize their build. The quantities listed are for a single half. A wide selection of parts can be purchased from AliExpress (international) or Bolt Depot (United States).

ErgoDoxLP Wireless​

  • M3 screw, 10mm length (6 pieces)
  • M3 washer, 0.5mm thick (12 pieces, 2 per screw)
  • M3 standard hex nut, 2.4mm thick (6 pieces, under bottom acrylic)
  • M3 thin hex nut, 1.8mm thick (6 pieces, between bottom acrylic and PCB)

ErgoDox Wireless Lite (plate with no custom top)​

  • M3 screw, 14mm length (6 pieces)
  • M3 standard hex nut, 2.4mm thick (6 pieces)

ErgoDox Wireless Lite (plate plus custom top)​

  • M3 screw, 18mm length (6 pieces)
  • M3 standard hex nut, 2.4mm thick (6 pieces)

ErgoDox Wireless Pro​

  • M3 screw, 8mm length (6 pieces)